Welding Guns

Our tried and tested welding guns enable the highest possible consistent welding quality due to special design. They impress with their ergonomics, compactness and user-friendly handling. They can be variably adapted to all welding tasks by using the appropriate accessories.

Find the right welding gun for your stud welding unit here.

A 12 M rechts

A 12 M

Bis zu 4 Schweißmuttern/min.
Learn more
M6 - M12
A16

A 16

All-rounder for construction sites. Robust gun with plunge dampener and length compensation. Level on rear of gun to line studs level.
Learn more
dia. 3 to 16 mm - dia. #4 to 5/8“
A16

A 16

All-rounder for construction sites. Robust gun with plunge dampener and length compensation. Level on rear of gun to line studs level.
Learn more
dia. 3 to 16 mm - dia. #4 to 5/8“
A22

A 22

Heavy duty gun for construction sites. Now with new leg guidance. Robust gun with plunge dampener and length compensation.
Learn more
dia. 14 to 22 mm (25 mm) - dia. 9/16“ to 7/8“ (1“)
A12 Ppr2 Re Ring

A 12 with centering tube PPR-2/SC

Small gun with easy set-up for SC welding. Length compensation (stable welding results).
Learn more
M3 to M8 (M10) - #4 to 5/16" (7/16")
A12 Psc1 Re

A 12 with ceramic leg assembly PSC-1

Compact gun with easy set-up Length compensation (stable welding results)
Learn more
M3 to M12 - #4 to 1/2“
A12 Pss1 Re Ring

A 12 with gas shroud PSS-1/SC

Small gun with easy set-up for SC welding. Length compensation (stable welding results).
Learn more
M3 to M8 (M10) - #4 to 5/16“ (7/16")
A12 Pss2 Re

A 12 with shielding gas leg assembly PSS-2

Compact gun with easy set-up. Length compensation (stable welding results).
Learn more
M3 to M12 - #4 to 1/2“
9320260 Mit 8005689 Pic 4C 001 Rechts

A 12-FL

Simple set-up of the gun without length compensation
Learn more
M3 to M12 - #4 to 1/2“
C06 3 Ppr 2 Re

C 06-3 with centering tube PPR-2

Used for welding with templates and for protection against spatter. Easy handling. No setting for lift and spring pressure. Aluminium to M4 (#8).
Learn more
M3 to M6 - #4 to 1/4‘‘
C06 3 Rechts Pic 4C

C 06-3 with foot ring

Universal design for use on flat surfaces. Easy handling. No setting for lift and spring pressure. Aluminium to M4 (#8).
Learn more
M3 to M6 - #4 to 1/4‘‘
9220286_pic_4c_rechts_LQ

C 08 with centering tube PPR-2

Used for welding with templates and for protection against spatter. All-rounder also used for welding galvanised base material. Aluminium to M4 (#8).
Learn more
M3 to M8 (M10) - #4 to 5/16“
9220256_pic_4c_rechts

C 08 with foot ring

Universal design for use on flat surfaces. All-rounder also used for welding galvanised base material. Aluminium to M4 (#8).
Learn more
M3 to M8 (M10) - #4 to 5/16“
9220285_pic_4c_rechts

CA 08 with centering tube PPR-2/CD

Used for welding with templates and for protection against spatter. Gap gun used to avoid rear side marking on thin sheets. Aluminum to M6 (1/4“). Brass to M4 (#8).
Learn more
M3 to M8 (M10) - #4 to 5/16“ (7/16“)
Ca08 Ppr2 Re Ring 1

CA 08 with centering tube PPR-2/SC

Entry-level version used for SC welding without length compensation.
Learn more
M3 to M8 (M10) - #4 to 5/16“ (7/16“)
Ca08 Re

CA 08 with foot ring

Universal design for use on flat surfaces. Used to avoid rear side marking on thin sheets. Aluminium to M6 (1/4“). Brass to M4 (#8).
Learn more
M3 to M8 (M10) - #4 to 5/16“ (7/16“)
Ca08 Pss1 Re Ring 1

CA 08 with gas shroud PSS-1/SC

Entry-level version used for SC welding without length compensation.
Learn more
M3 to M8 (M10) (for SC) #4 to 5/16“ (7/16“) (for SC)
9220254_pic_4c_rechts

CI 03

Especially suitable for welding on cupped head pins (HVAC)
Learn more
dia. 2/2.7 mm / 14 ga/12 ga
stud welding head

KAH 412

Setting the lift and immersion dimension via Digital display (mm/inch switch) Without length compensation
Learn more
M3 - M8 (Ø10 - 12,7 mm)
9437412 Pic 4C Rechts

KAH 412 LA

Setting the lift via adjustment screw (increments 0.1 mm) Length compensation of length variances in studs height and variances of the workpiece
Learn more
M3 to M8 (dia. 10 to 12.7 mm)
9420028 Pic 4C Rechts

PAH-1 (centering device dia. 30 mm)

Used for welding with templates Hand gun for fully automatic stud feed (with VBZ-3) or hand feed Recommended for large-scale production
Learn more
M3 to M8
9420025 Pic 4C Rechts

PAH-1 (Tripod)

Universal design for flat surfaces Hand gun for fully automatic stud feed (with VBZ-3) or hand feed Recommended for large-scale production
Learn more
M3 to M8

"Which welding gun can best solve my problem?

The right choice of welding gun has a decisive influence on the welding process due to the required precision in the movement sequence.
In addition to the welding environment - stud diameter, stud length - ergonomic aspects (weight, handling), accessibility, the gun dimensions and cable lengths are also important.
Other possible accessories such as sound proofing or positioning tubes, protective gas assemblies, angle brackets, chucks or the use of other HBS power units for other dimensions etc. should also be considered.

Before making a purchase, the following must be clearly clarified:

WHAT - namely the welding stud(s) type should be
HOW
- with which stud welding method
WITH WHAT
- with which HBS power unit
with which
accessory - shielding gas / ceramic ring / positioning tube etc.

The intended use determines the equipment.

HBS Catalogue Stud Welding Systems
Studwelding Basics
Alex Heinzel

Interview with Alex Heinzel

10 Fakten about Alex. 💡

Amelie Burghart & Jenny Mittenzwei

Completion of the working student program

Amelie is completing her working student program in the marketing department today and would like to share a few impressions with you. 🤗

YES Open House

YES Open House

Daniel is currently presenting our products at the in-house exhibition of YES Machinery. 🤗

Interview Praktikantin Lara

Interview with Lara

10 facts about our intern Lara. 💡