CDi 1502 AT

Mild steel Stainless steel Brass Aluminium
M3 to M8 - #4 to 5/16“

Description

Unbeatable new power pack

  • With efficient inverter-capacitor charging technology
  • Enormous time and energy savings (30 % less energy!)
  • Highest cycle sequence of its class (up to 40 studs/min.)
  • 20 % energy reserve due to 220 V charging voltage
  • Simple operation & minimal weight (20 % lighter than previous model)
  • Extreme long life due to robust and functional industrial design

Highest level of quality and safety

  • Capacitor formation recorded - Quality control for consistent capacitor quality through automateed formation
  • Shock-proof capacitor battery - No contact of the capacitors to the device housing; sparkover (short cicuit) is therefore not possible!
  • Cooling channel - Protects the electronic components from getting soiled. Ideal cooling of the inverter charging p.c. board for high sequence cycles.
Welding range M3 to M8, dia. 2 to 8 mm / #4 to 5/16“ , dia. 14 ga to 5/16“ Cupped head pins: dia. 2 and 2.7 mm / 14 ga and 12 ga Insulation pins: dia. 2 and 3 mm / 14 ga and #4
Welding rate M3 / #4 = 40 studs/min. (voltage 60 V) M8 / 5/16“ = 14 studs/min. (voltage 200 V)
Capacitance 66000 μF
Welding time 1 to 3 ms
Energy 1600 Ws
Charging voltage 50 to 220 V (stepless voltage regulation)
Primary power 230 V/115 V*, 50/60 Hz, 10 AT (slow blow) *alternative primary power see „Order No.“
Connected load 600 VA
Power source Capacitor
Cooling type F (temperature controlled cooling fan)
IP Code IP 21
Dimension LxWxH (without handle) 400 x 205 x 250 mm / 15.75“ x 8.07“ x 9.84“
Weight 14 kg / 30.87 lbs
Suitable guns PAH-1
Order No. 92-10-1504B (230 V) 92-12-1504B (115 V) 92-13-1504B (100 V)

Suitable stud welding guns: